Condenser & Chiller Inc
Condenser & Chiller Services provides complete shell and tube heat exchanger support
Download PDF of this page  Print this page

Gaskets

gasket is a mechanical seal which fills the space between two or more mating surfaces, generally to prevent leakage from or into the joined objects while under compression.

Gaskets allow "less-than-perfect" mating surfaces on machine parts where they can fill irregularities. Gaskets are commonly produced by cutting from sheet materials.

Gaskets for specific applications, such as high pressure steam systems, may contain asbestos. However, due to health hazards associated with asbestos exposure, non-asbestos gasket materials are used when practical.

It is usually desirable that the gasket be made from a material that is to some degree yielding such that it is able to deform and tightly fills the space it is designed for, including any slight irregularities. A few gaskets require an application of sealant directly to the gasket surface to function properly.

Some (piping) gaskets are made entirely of metal and rely on a seating surface to accomplish the seal; the metal's own spring characteristics are utilized (up to but not passing σy, the material's yield strength). This is typical of some "ring joints" (RJ) or some other metal gasket systems such as those made by Grayloc (an International company). These joints are known as R-con and E-con compressive type joints

 


We stock condenser, evaporator and divider plate gasket material.  We can custom cut gaskets for you in red rubber, buna N, neoprene, garlock 100 to 3300, cork impregnated neoprene or gortex.  We stock or cut most 150 lb. To 300 lb. pipe flange sizes. We normally stock victaulic gaskets in various sizes. If there is an application that you need a gasket, request a quote, or please give us a call at 800-356-1932.